Glow in the Dark Car Vehicle Antenna Modification How to find your Whip ride Video: C-Max

This video is about making your antenna on your car glow in the dark.

 

Video link

Instuctables article here

 

Glow in the dark Antenna

 

You will need the following

-Removable Vehicle antenna

-120 grit sandpaper

Adhesion Promoter Dupli-Color

-White automotive sandable primer Dupli-color

White Plasti Dip

-Clear Plasti Dip

-Ultra Blue Glow in the dark powder

Screen Shot 2016-08-09 at 7.44.09 PM.png

I was having a tough time finding my white car occasionally. I wanted to remedy that situation by having an antenna that was unique and stood out in a crowd. I settled on a Glow option as it would be a lighter color than other vehicles  and “of course” glows in the dark!

IMG_3722cropped.JPG

I started by simply unscrewing and removing the antenna from the vehicle so I could work on it.

First I lightly sanded the antenna so I could prep it for the adhesion promoter. Then washed it with dish soap to remove any loose particles from sanding, and degreased it.

sanding

Since I had no idea what kind of plastic I was coating I did not want to leave this to chance. I applied three coats of Dupli-Color adhesion promoter to the antenna to guarantee that whatever paint I applied on the antenna would stick. The directions recommend to wait ten minutes between coats.

Screen Shot 2016-08-09 at 7.53.24 PM.png

Next I layed down a light coat of white automotive primer to create a white base coat. (See video) I kept it light since the I did not want there to be any chance of it cracking. The main purpose of the primer was for the white base color and to improve the adhesion of the plastiDip.

Screen Shot 2016-08-09 at 7.56.15 PM.png

Once the primer had a chance to set but not fully dry (about 30 minutes) I began to lay down the first of the three coats of Plasti Dip. I waited about 20 minutes in between the coats for the material to flash before I applied the next coat. (“Flash” means some of the solvent in the paint has had time to evaporate, you can tell this when the paint changes from glossy to a satin finish)

Screen Shot 2016-08-09 at 8.02.02 PM.png

After the third and last white Plasti Dip coat I immediately started to sprinkle on the Ultra Blue Glow in the dark powder (see video). I then sprayed a coat of clear Plasti Dip on top of the powder and repeated the process with another coat of glow powder. I did this three times until I felt there was sufficient glow in the dark material on the antenna.

Screen Shot 2016-08-09 at 8.03.19 PM.png

I then let that dry about an hour and applied two more coats of clear plasti Dip to seal the powder and make the antenna smooth again. I let it dry for 24 hours before I re-attached it back onto my car.

IMG_3668

That’s it. It glows at dusk, maybe last for 2-3 hours, but is easy to recharge with the headlight of your car, or cell phone flash. Pretty sweet driving around with a glow in the dark whip tail on your car. Nobody else has one! At least for now. Good luck to everyone that tries the mod. Have fun.

IMG_3676

Eric Strebel, is an Industrial Designer living in Southfield MI. He has a home-based Industrial design studio “Botzen Design” and has been designing consumer products for 25+ years ranging from sunglasses for Bauch & Lomb, Traps eyewear, entry level luxury vehicles for Ford, wireless charging PowerMat for Homedics, to magnetic toys for Guidecraft. He specializes in tabletop and handheld products, ranging from routers to cosmetic products to Bluetooth devices and everything in between, he also teaches Industrial Design at Wayne State University and CCS (College for Creative Studies)

 

Follow Eric on Twitter @botzendesign and Subscribe to his Youtube channel.

Subscribe here

Other Videos here  How to Build Ultra Quiet Refrigerator Air Compressor DIY: Silent Homemade Shop set up step by step

Article here

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s